• Home
  • Case Studies
  • XPressEntry Site Access and Mustering Integration with Gallagher Command Centre for a Global Engineering and Construction Firm

XPressEntry Site Access and Mustering Integration with Gallagher Command Centre for a Global Engineering and Construction Firm

Large industrial construction site with tower cranes, where contractor access is managed with XPressEntry handheld readers.

Introduction

What began as a two-handheld pilot in 2018 is now a global standard. A major engineering, procurement and construction (EPC) firm runs more than 250 XPressEntry handheld readers, integrated with Gallagher Command Centre, to verify workers, track entry and exit, and account for personnel during emergencies on construction sites in the USA, Canada, Germany and Indonesia. New projects now adopt XPressEntry as part of their standard security rollout.

At a Glance

250+

XPressEntry handheld readers

4

countries: USA, Canada, Germany, Indonesia

8+

years, from a 2-device pilot in 2018

Customer Global engineering, procurement and construction (EPC) firm
Industries Energy, industrial and manufacturing
Integration Gallagher Command Centre
Applications Mobile access control, entry and exit tracking, emergency mustering

Challenges

Large construction projects move thousands of contractors through temporary gates, often far from corporate IT. The firm needed to verify every worker, keep access under central control in Gallagher, and know who was on site in an emergency.

  • Temporary access points. Workers enter at gates, bus drop-offs and laydown areas where fixed readers are impractical.
  • High volume at shift change. Thousands of badges must be scanned in a few hours without long lines.
  • Limited connectivity. Remote sites need badge checks that keep working when WiFi or cellular drops.
  • One standard worldwide. Corporate security wanted the same process on every project, in every country.

Solution

The firm standardized on XPressEntry handheld readers integrated with Gallagher Command Centre, extending its access control beyond fixed doors.

  • Gallagher integration. Cardholders, photos and permissions sync from Gallagher, and handheld transactions flow back to it.
  • Global reach. Remote sites connect to the firm’s enterprise Gallagher infrastructure. Projects in Europe and Asia run on a server in North America.
  • Existing badges. Handhelds read the Gallagher MIFARE DESFire cards used at most sites, plus HID proximity cards where needed, so no separate badges are issued.
  • Online and offline. Handhelds validate badges without a connection, then sync stored transactions over WiFi, cellular, or an Ethernet cradle (docking station) when connectivity returns.
  • Emergency mustering. In an evacuation, safety managers, EHS teams or evacuation wardens scan workers at muster points to see who is accounted for and who may be missing. When connected, muster status is shared across the system in real time.

Deployment Highlights

Since the pilot, XPressEntry has expanded to projects in four countries, from large energy developments to new manufacturing plants.

Country Project Highlights
Canada Energy project About 160 handhelds handle high-volume contractor entry, including workers arriving by bus at shift change.
USA Industrial and manufacturing projects Multiple sites on the enterprise Gallagher system, including manufacturing facilities under construction. Devices are added as new projects start.
USA Manufacturing plant Standalone Gallagher system for emergency mustering, using HID 35-bit cards and 802.1X network authentication.
Indonesia Energy construction project About 1,500 contractors. Access control and mustering work offline and sync through Ethernet cradles to a North American server.
Germany Construction project Entry and exit tracking over WiFi and cellular, on a US-based Gallagher server.

Investment Protection

Same handhelds.
New access control system.

When the Canadian site moved from its previous access control system to Gallagher Command Centre, its existing XPressEntry handhelds moved with it.

Operational Benefits

The program grew from two handhelds in 2018 to more than 250 across four countries, with new orders continuing in 2026.

  • Consistent oversight Participating enterprise sites share one Gallagher system of record for access activity.
  • Faster entry Security teams verify thousands of workers at temporary gates and bus drop-offs without fixed infrastructure.
  • No second badge system Workers use the credentials they already carry.
  • Uninterrupted operation Scanning continues through network outages.
  • Emergency accountability Safety teams know who is accounted for during evacuations at participating sites.
  • Investment protection Handhelds carried over when the largest site changed access control systems.

Conclusion

From a two-device pilot to more than 250 handhelds on three continents, XPressEntry has become a standard part of this EPC firm’s construction site security. Its continued expansion shows what enterprises need from mobile access control: deep integration with their access control system, reliability at remote sites, and hardware that adapts as their infrastructure changes.

Why Organizations Choose XPressEntry

  • Works with Gallagher Command Centre and many other leading access control systems
  • Handhelds can carry over when access control systems or card technologies change
  • Supports MIFARE DESFire, HID proximity, and other physical and mobile credentials
  • Rugged Android 15 handhelds built for construction, energy and industrial sites

Frequently Asked Questions

Does XPressEntry integrate with Gallagher Command Centre?

Yes. It syncs cardholders, photos and permissions from Gallagher and sends handheld transactions back.

Can XPressEntry support sites in multiple countries?

Yes. This deployment covers the USA, Canada, Germany and Indonesia, with overseas sites connecting to a Gallagher server in North America.

Does XPressEntry work without WiFi or cellular?

Yes. Handhelds validate badges and record transactions offline, then sync over WiFi, cellular, or an Ethernet cradle when connectivity returns.

Can the same handhelds handle access control and emergency mustering?

Yes. They track daily entry and exit, and in an evacuation they record who reaches each muster point.

Do workers need new badges?

Not in this deployment. The handhelds read the Gallagher MIFARE DESFire and HID proximity cards already in use.

Can handhelds be kept when changing access control systems?

Yes, when XPressEntry supports the new system and the site’s credentials. Here, the largest site kept its handhelds when it moved to Gallagher Command Centre.


Contact Us

Extend Gallagher Command Centre beyond fixed doors.

See how XPressEntry handles contractor entry, mobile access control and emergency mustering on your construction and industrial sites.

Contact Telaeris or request a demo →

XPressEntry

Request more information here!