XPressProx BLE 100
Hardware
- Handheld Readers
- Fixed & Kiosk Readers
- Tablet Readers
- Desktop Badge Readers
Download
XPressProx BLE 100




XPRESSENTRY BADGE READING ON IPHONE AND ANDROID
The XPressProx BLE 100 adds badge reading to iPhone and Android phones already approved on the corporate network, giving sites an affordable way to get started now. It works with the XPressEntry app for badge verification, emergency mustering and entry and exit tracking with the existing access control system.
- NO NEW NETWORK DEVICES – The reader pairs with the phone over Bluetooth and never joins the network, so IT has no new device to approve.
- GET STARTED NOW – Skip the long certification cycle new handhelds can face on corporate networks and start verifying badges right away.
- MULTI-TECHNOLOGY READER – One reader handles 125 kHz prox, 13.56 MHz smart cards such as iCLASS, SEOS and DESFire, PIV, CAC, TWIC and mobile credentials.
- AN AFFORDABLE WAY TO DEPLOY – Equip more guards, entrances and muster points for less by adding a reader to phones the organization already owns.
- FITS IPHONE-ONLY POLICIES – Brings XPressEntry to organizations that standardize on iPhone, with Android and rugged Android phones supported too.
- BUILT FOR XPRESSENTRY – Connects to existing access control systems through XPressEntry, with every scan and activity in sync.
The BLE 100 is a complete solution with the XPressEntry app, ready to use out of the box. It runs on the same XPressEntry platform as XPID handheld readers. Badge scans, muster counts and entry and exit records all come together in one XPressEntry system and Web Console for the security office.
No New Devices on the Network
Many corporate IT teams limit which devices can join their network, and certifying a new handheld can take a long time. The BLE 100 works with the iPhone and Android phones the organization has already approved. The reader has no Wi-Fi and connects only to the phone, over Bluetooth or USB-C on Android 14 or later, while the phone handles the connection to XPressEntry. Sites can start verifying badges and running emergency mustering now, without waiting on a new device approval.
One Reader, Many Badge Technologies
Most phones can read only some 13.56 MHz cards with their built-in NFC, and they cannot read 125 kHz proximity badges. The BLE 100 is a multi-technology reader. It reads 125 kHz proximity badges such as HID Prox, Indala and EM, 13.56 MHz smart cards such as iCLASS, SEOS, MIFARE and DESFire, PIV, CAC and TWIC cards and mobile credentials such as HID Mobile Access, Nedap Mobile Credentials and Safetrust, depending on the reader’s configuration. Sites with older and newer badges in use can verify both with the same reader.
An Affordable Way to Deploy
The phone supplies the screen, processor, network connection and camera, so sites invest in a compact 130 g reader instead of a full handheld for each user. That makes it more economical to equip more guards, entrances and muster points, including temporary entrances, remote gates and events with no fixed reader. Sites can run both XPID handheld readers and phones with the BLE 100 in the same XPressEntry deployment, choosing the right device for each role.
For Sites That Standardize on iPhone
XPID handheld readers run on Android, and many organizations issue iPhones and require them under their corporate security policies. The BLE 100 brings XPressEntry badge reading to those iPhones. Android phones work too, including rugged models, and guards use the same XPressEntry app on both.
Wireless and Built for the Field
The BLE 100 pairs with the phone over Bluetooth 5.0 LE with LE Secure Connections pairing, which protects the link between the reader and the phone. The 130 g reader is water resistant, drop resistant up to 5 ft and runs on its own rechargeable 2000 mAh battery, so it does not draw power from the phone. Sites that need a dedicated, sealed handheld can choose the XPID210, which runs the same XPressEntry platform.
How It Works
- Clip On The BLE 100 clips onto the back of an iPhone or Android phone.
- Connect The XPressEntry app pairs with the reader over Bluetooth, or over USB-C on Android 14 or later.
- Scan Personnel present their credential to the reader.
- Verify Guards verify identity and permissions in XPressEntry, and every scan is logged.
- Recharge The reader recharges over USB-C, separately from the phone.
Specifications
- LF Tags 125 kHz: HID Prox, Indala, FarPointe, EM, CASI-RUSCO, Pyramid and Securakey
- HF Tags 13.56 MHz: iCLASS, SEOS, MIFARE, DESFire EV1, EV2 and EV3, PIV, CAC, TWIC, FeliCa, LEGIC, Allegion, STid, Gallagher, Paxton, ISO 14443 A/B and ISO 15693
- Mobile Credentials HID Mobile Access, Nedap Mobile Credentials and Safetrust, depending on the reader’s firmware configuration
- Read Range 1 to 4 in. (LF and HF), depending on the card
- Bluetooth Bluetooth 5.0 LE with long-range and 2 Mbps PHY support and LE Secure Connections pairing
- USB USB-C network connection on Android 14 or later, not available on iOS; switches automatically between USB and Bluetooth
- Processor Dual-Core Xtensa LX7 MCU
- Battery Rechargeable Li-Po, 3.7 V, 2000 mAh; does not draw power from the phone
- Size and Weight 5.91 in H x 3.31 in W (150 mm x 84 mm); 1.41 in (36 mm) maximum extension; 130 g
- Environment Operating -20°C to 80°C; storage -40°C to 85°C; 5% to 95% RH, non-condensing
- Durability Water resistant; 5 ft (1.5 m) drop to concrete
- Compliance NDAA 2019, Section 889
Compatible Phones
- Phone Size 144 to 179 mm (5.67 to 7.05 in) tall; modular clips fit different phone thicknesses
- Example Phones Most iPhone 13 and later models; Samsung Galaxy S21 FE and later; Google Pixel 6 and later; rugged Android phones from Zebra, Honeywell, CAT, Sonim and Kyocera
- Recommended iPhone 15 or newer or Android 10 or later. Tablets are not supported. Phone not included.
- Software XPressEntry app, with the XPressEntry Server on-premises or in the customer’s own cloud
Frequently Asked Questions
Does the reader need to join the corporate network?
No. The BLE 100 has no Wi-Fi and connects only to the phone, over Bluetooth or USB-C on Android 14 or later. The phone, already approved on the network, handles the connection to XPressEntry.
Does it work with iPhones?
Yes. The BLE 100 brings XPressEntry badge reading to iPhones as well as Android phones. The XPressEntry app offers the same features on both, and iPhones connect over Bluetooth.
What software does it use?
The XPressEntry app on the phone, connected to the XPressEntry Server and the existing access control system. Together they form a complete solution that is ready to use out of the box.
How does it compare with an XPID handheld reader?
The BLE 100 offers the same badge reading capabilities as XPID handheld readers and runs on the same XPressEntry platform, on iPhone or Android. The XPID210 is a dedicated, sealed Android handheld with a built-in barcode engine and a larger battery. Sites can use both, chosen by role.
Why not use the phone’s built-in NFC?
Phone NFC reads only some 13.56 MHz cards. It cannot read 125 kHz proximity badges, and many secured credentials need a licensed reader. The BLE 100 adds that badge coverage.
Does it support facial recognition and barcodes?
Yes. XPressEntry uses the phone’s camera for facial recognition and 1D and 2D barcode scanning. On a few phone models the reader can cover the camera, so check phone fit before a large rollout.
Does it draw power from the phone?
No. The reader runs on its own rechargeable 2000 mAh battery, charged over USB-C.
Trusted Worldwide
Physical security and safety professionals in 50+ countries trust XPressEntry. See how the XPressProx BLE 100 brings XPressEntry to the phones security teams already use.
XPressEntry Standalone
No access control system?
No Problem.
Not every site has an access control system, or needs one yet. XPressEntry Standalone runs on its own, whether a site is under construction and will integrate once it’s operational, is a temporary operation or simply doesn’t need access control.